DrymaxCDMLargeS

Technical parameter

Height (inch) 55
Width (inch) 85
Depth (inch) 39
Weight(lbs) 1,114
Voltage options 220 or 460
Phase 3
Frequency(Hz) 60
Total Power(kW) 25
Regeneration Heater Power Requirements (kW) 22
Process Airflow Maximum ? Dry Air (cfm) 1,765
Process Airflow Static Pressure (WG) 5
Regen Airflow Nominal ? Wet Air (cfm) 423
Regen Airflow Static Pressure (WG) 3.2
Process Air Outlet Dia (inch) 16
Process Air Inlet (L X W) 29 X 21
Regen Air Outlet Dia (inch) 10
Regen Air Inlet (L X W) 19 X 19
Rotor Wheel Speed (rph) 10.2
Rotor Size dia X depth (inch) 25.5 X 7.9
Typical Extraction @ 60?F 60%RH (ppd) 840
Min Operating Temperature (?F) -4

Price:

  • Description
  • Reviews (0)

Product Description

Dehumidification is possible using two possible principles, Condensation with refrigeration style dehumidifiers and Adsorption with desiccant dehumidifiers. Desiccant dehumidifiers perform exceptionally well when used in cooler climates, or when a low dew-point, deep drying or low humidity levels are required. Since desiccant dehumidifiers do not produce water, they will work effectively down to sub zero temperatures. Their operation is simplistic yet extremely effective and reliable. Air (Process Air) is drawn into the dehumidifier, where is passes over a wheel impregnated with Silica Gel. As the air passes over this wheel, any moisture present in the air is absorbed into the Silica Gel wheel before leaving the dehumidifier as warm dry air. The Silica Gel wheel is continually, slowly rotating, typically at three revolutions per hour. As the wheel rotates, a small portion passes through the regeneration segment. During this phase a second air stream (Regeneration Air) is heated to a high temperature before passing over the wheel. Any moisture present in the wheel is released into this air stream; this hot wet air is then exhausted outside the area being dried.

The Drymax desiccant dehumidifiers all incorporate the well proven, Proflute desiccant wheels thereby ensuring their products, as a minimum, equal performance to major competitors products. This range of large desiccant dehumidifiers, have been designed to accommodate a wide range of regeneration heat sources, ie electric, steam and gas, thereby ensuring a wide variety of installations are accommodated. The programmable electronic controller, and high capacity EC process fan, allows easy installation and also the flexibility for the end user to fine tune drying capacities catering for, high extraction, high efficiency or deep drying, depending upon the final application. Facility for an external humidistat allows remote control of the drying cycle All models incorporate a high efficiency patented PPS Rotor. This design incorporates an 82% active Silica Gel to ensure optimum performance over the equipments wide operating range of environments. All desiccant rotors supplied by Naav are washable, and designed for high performance / long life. The chassis design incorporates access points for fork lifts and pallet trucks, allowing for easy maneuvering into awkward site locations. All side panels are removable, allowing for easy servicing and maintenance. Should a fault arise various fault indicator lamps allow easy diagnostics and thereby minimum downtime.

Reviews

There are no reviews yet.


Be the first to review “DryMax CDM-1765”