Technical parameter

Height (inch) 16.5
Width (inch) 15.75
Depth (inch) 21.25
Weight(lbs) 59.5
Voltage 220
Phase 1
Frequency(Hz) 60
Power(kW) 1.8
Current(A) 8.0
Process Airflow(cfm) 197
Regen Airflow(cfm) 119
Process Duct Size (inch) 5.0
Regen Duct Size (inch) 4.0
Noise Level(dba) 67
Typical Extraction(ppd) 71.5
Min Operating Temp (?F) -4
Max OperatingTemp (?F) 104


  • Description
  • Reviews (0)

Product Description

Dehumidification is possible using two possible principles, Condensation with refrigeration style dehumidifiers and Adsorption with desiccant dehumidifiers. Desiccant dehumidifiers perform exceptionally well when used in cooler climates, or when a low dew-point, deep drying or low humidity levels are required. Since desiccant dehumidifiers do not produce water, they will work effectively down to sub zero temperatures. Their operation is simplistic yet extremely effective and reliable. Air (Process Air) is drawn into the dehumidifier, where is passes over a wheel impregnated with Silica Gel. As the air passes over this wheel, any moisture present in the air is absorbed into the Silica Gel wheel before leaving the dehumidifier as warm dry air. The Silica Gel wheel is continually, slowly rotating, typically at three revolutions per hour. As the wheel rotates, a small portion passes through the regeneration segment. During this phase a second air stream (Regeneration Air) is heated to a high temperature before passing over the wheel. Any moisture present in the wheel is released into this air stream; this hot wet air is then exhausted outside the area being dried.


The CDM197 desiccant dehumidifier has a compact, rugged, lightweight design that facilitates easy transportation by one person and is easily accommodated within space restricted areas. The unit incorporates a PTC Heater ensuring maximum drying is immediately reached and constantly maintained while the unit is running. In addition to the hours run meter, which shows the units running time, an ammeter is also incorporated in order to monitor the units drying effectiveness. Manual / Automatic control is a standard feature within the CDM range of desiccant dehumidifiers, and a remote humidistat can quickly and easily be connected for automatic operation and control. Drymax range of CDM desiccant dehumidifiers are all manufactured from a high grade stainless steel, ensuring a rust free product when used in the most severe of applications. The spigot connectors allow quick and easy installation. All models incorporate a high efficiency patented PPS Rotor. This design incorporates an 82% active Silica Gel to ensure optimum performance over the equipments wide operating range of environments. All desiccant rotors supplied by EIPL are washable, and designed for high performance / long life.


There are no reviews yet.

Be the first to review “DryMax CDM-197”